Tripod Spares : Long 3/8" to 1/4" Adaptor With No Lip - 2 Pack
Tripod Spares : Long 3/8" to 1/4" Adaptor With No Lip - 2 Pack
Item: O-VGT38TO14-L-NOLIP
Delivery: FREE
Overview
This is a 2-pack of the 3/8" to 1/4" adaptors which does not have a lip at the base.
- Total Height: 9mm
- Base Width: 8mm
- Weight: 1g
These adaptors do not have a lip on the base so will fit into any standard 3/8" thread hole, but are slightly longer to fit (standard are 8mm long) the largest heads where the maximum maximum points of contact are key to stability.
There are two thread sizes that have become industry standard for connecting tripods and tripod heads, and a range of other accessories. The smaller is the 1/4" thread which tends to be used for smaller travel tripods and heads, but can also be used for a good range of full sized tripods. The larger is the 3/8" thread which tends to be used for larger tripods.
If your tripod has a 1/4" thread and your head (or accessory) has a 3/8" thread then you will need an adaptor like this to connect the two.
Most credible tripod head brands will include these as standard, but they are also easily lost. This is a spare 2-pack of adaptors that are 0.9mm long without a lip so should fit into almost any 3/8" thread hole.
These threads are slightly longer to fit (standard are 8mm long) the largest heads where the maximum maximum points of contact are key to stability
Please Note: Due to the value, if you only order this product then there will be a postage and delivery charge.
| Part | 3/8" to 1/4" long adaptor with no lip | 3/8" to 1/4" long adaptor with no lip |
|---|---|---|
| Length | 9mm | 9mm |
| Lip On Base | No | No |
| Quantity | 2 | 2 |
| Category | Spares | Spares |
There are two thread sizes that have become industry standard for connecting tripods and tripod heads, and a range of other accessories. The smaller is the 1/4" thread which tends to be used for smaller travel tripods and heads, but can also be used for a good range of full sized tripods. The larger is the 3/8" thread which tends to be used for larger tripods.
If your tripod has a 1/4" thread and your head (or accessory) has a 3/8" thread then you will need an adaptor like this to connect the two.
Most credible tripod head brands will include these as standard, but they are also easily lost. This is a spare 2-pack of adaptors that are 0.9mm long without a lip so should fit into almost any 3/8" thread hole.
These threads are slightly longer to fit (standard are 8mm long) the largest heads where the maximum maximum points of contact are key to stability
Please Note: Due to the value, if you only order this product then there will be a postage and delivery charge.
| Part | 3/8" to 1/4" long adaptor with no lip | 3/8" to 1/4" long adaptor with no lip |
|---|---|---|
| Length | 9mm | 9mm |
| Lip On Base | No | No |
| Quantity | 2 | 2 |
| Category | Spares | Spares |